Laminated Tube Filling and Sealing Machine
ATFM model is very cost-effective filler providing many features. The design of the Machine is ergonomic, easy to handle and maintain for operators. It incorporates a full-size opening of the front guard with excellent access for maintenance and change-over and an improved Tube orientation system that guarantees even better accuracy. The machine is mainly mechanical and therefore, easy to operate and maintain.
ATFM model is designed to fill and seal Plastic and Laminated tubes. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. This machine model is widely uses for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system.
The heating of the Lami or the Plastic tubes is done by a standard heater which has a capability of attaining max temperature up to 700°C during constant air flow is on. At the heating section the tube is lifted inside the heater part by which only the area to be sealed is heated without affecting the filled material. The sealing of the Lami and the plastic tube is done in a single station with pneumatic jaws which has provision of holding no in its made pockets. After the sealing the trimming if also done by pneumatic blades to give the tube a smooth finish.
Batch types of numeric 0 to 9 are provided with the machine extra types can be bought on request.
|Model No.||ATFM 1||ATFM 2|
|No. of Filling Head||Single Head||Double Head|
|No. of Station (Geneva Cam Driven)||12||12|
|Hopper Capacity||25 Litre||35 Litre|
|Production Output (Per Min)||27 - 30 tubes||55 - 60 tubes|
|Tube Diameter||12 to 50 mm|
|Tube Length||50 to 200 mm|
|Tube Loading System||Manual /Automatic|
|Tube Orientation||Manual/ Automatic|
|Max. Filling Capacity||5 to 200 grams||5 to 50 grams|
|Air Heater||2 Kw||2.5 Kw|
|Water Pump 9For cooling of the heater)||0.25 H.P.||0.50 H.P.|
|Power||1 H.P.||1 H.P.|
|Electrical||440 Volts, 3 Phase, 50 hertz, four wire system|
|Compressed Air||10 Bar||12 Bar|
|Operator Required||1 Person||1 or 2 Person|
|Machine Dimension||900 mm x 1100 mm x 1800 mm||900 mm x 1100 mm x 1800 mm|
|Net Weight||295 Kgs.||465 Kgs.|
|Gross Weight||375 Kgs.||580 Kgs.|